Zum Inhalt wechseln


openSUSE Leap 42.2: PC/SC Dämon Ladefehler

linux opensuse e-com pinpad

  • Bitte melde dich an, um zu antworten
5 Antworten auf dieses Thema

#1 jeriba

jeriba

    Neues Mitglied

  • Members
  • PIP
  • 1 Beiträge:

Geschrieben 02 January 2017 - 20:05 PM

Hallo,

 

nach Update von openSUSE Leap 42.1 auf 42.2 will cyberJack e-com nicht mehr geladen werden.

# rcpcscd status

* pcscd.service - PC/SC Smart Card Daemon
Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
Active: active (running) since Mon 2017-01-02 19:19:54 CET; 8s ago
Main PID: 4548 (pcscd)
Tasks: 3 (limit: 512)
CGroup: /system.slice/pcscd.service
`-4548 /usr/sbin/pcscd --foreground --auto-exit

Jan 02 19:19:54 polaris.oetlingen.de systemd[1]: Started PC/SC Smart Card Daemon.
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: CYBERJACK: Started
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: RSCT: Error on libusb_get_string_descriptor_ascii: -1
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: RSCT: Error on libusb_get_string_descriptor_ascii: -1
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000000 readerfactory.c:1108:RFInitializeReader() Open Port 0x200000 Failed (usb:0c4b/0401:libudev:0:/dev/bus/usb/001/006)
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000034 readerfactory.c:373:RFAddReader() REINER SCT cyberJack pp_a2 (8920283324) init failed.
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000094 hotplug_libudev.c:520:HPAddDevice() Failed adding USB device: REINER SCT cyberJack pp_a2
 

Ideen, wo man ansetzen kann?

 

Vielen Dank



#2 Sauerland

Sauerland

    Neues Mitglied

  • Members
  • PIP
  • 6 Beiträge:

Geschrieben 14 January 2017 - 12:56 PM

Hallo,

 

nach Update von openSUSE Leap 42.1 auf 42.2 will cyberJack e-com nicht mehr geladen werden.

# rcpcscd status

* pcscd.service - PC/SC Smart Card Daemon
Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
Active: active (running) since Mon 2017-01-02 19:19:54 CET; 8s ago
Main PID: 4548 (pcscd)
Tasks: 3 (limit: 512)
CGroup: /system.slice/pcscd.service
`-4548 /usr/sbin/pcscd --foreground --auto-exit

Jan 02 19:19:54 polaris.oetlingen.de systemd[1]: Started PC/SC Smart Card Daemon.
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: CYBERJACK: Started
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: RSCT: Error on libusb_get_string_descriptor_ascii: -1
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: RSCT: Error on libusb_get_string_descriptor_ascii: -1
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000000 readerfactory.c:1108:RFInitializeReader() Open Port 0x200000 Failed (usb:0c4b/0401:libudev:0:/dev/bus/usb/001/006)
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000034 readerfactory.c:373:RFAddReader() REINER SCT cyberJack pp_a2 (8920283324) init failed.
Jan 02 19:19:54 polaris.oetlingen.de pcscd[4548]: 00000094 hotplug_libudev.c:520:HPAddDevice() Failed adding USB device: REINER SCT cyberJack pp_a2
 

Ideen, wo man ansetzen kann?

 

Vielen Dank

Welche Repos sind eingebunden, woher ist pcsc?

zypper lr -d
zypper se -si pcsc

Hier läuft es:

systemctl status pcscd.service 
● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
   Active: inactive (dead) since Sa 2017-01-14 11:10:32 CET; 1h 45min ago
  Process: 30382 ExecStart=/usr/sbin/pcscd --foreground --auto-exit $PCSCD_OPTIONS (code=exited, status=0/SUCCESS)
 Main PID: 30382 (code=exited, status=0/SUCCESS)

Jan 14 11:09:01 linux64 systemd[1]: Started PC/SC Smart Card Daemon.
Jan 14 11:09:01 linux64 pcscd[30382]: CYBERJACK: Started


#3 flinter

flinter

    Neues Mitglied

  • Members
  • PIP
  • 2 Beiträge:

Geschrieben 19 January 2017 - 10:30 AM

Auch ich kann nach der Umstellung von 42.1 auf 42.2 nicht mehr auf den Chipkartenleser zugreifen. Allerdings habe ich eine andere Umgebung und andere Meldungen.

clara:~ # systemctl status pcscd.service
● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-01-19 09:37:22 CET; 14s ago
 Main PID: 3066 (pcscd)
    Tasks: 2 (limit: 512)
   CGroup: /system.slice/pcscd.service
           └─3066 /usr/sbin/pcscd --foreground --auto-exit

Jan 19 09:37:22 clara systemd[1]: Started PC/SC Smart Card Daemon.
clara:~ # lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 006 Device 002: ID 0c4b:0100 Reiner SCT Kartensysteme GmbH cyberJack e-com/pinpad

Wenn ich den Chipkartenleser anschließe kommen die Meldungen:

lara:~ # systemctl status pcscd.service
● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-01-19 09:37:22 CET; 14s ago
 Main PID: 3066 (pcscd)
    Tasks: 2 (limit: 512)
   CGroup: /system.slice/pcscd.service
           └─3066 /usr/sbin/pcscd --foreground --auto-exit

Jan 19 09:53:51 clara nmbd[1857]:   Cannot sync browser lists.
Jan 19 09:57:30 clara kernel: usb 6-3: USB disconnect, device number 2
Jan 19 09:57:30 clara kernel: cyberjack ttyUSB0: Reiner SCT Cyberjack USB card reader converter now disconnected from ttyUSB0
Jan 19 09:57:30 clara kernel: cyberjack 6-3:1.0: device disconnected
Jan 19 09:57:40 clara kernel: usb 6-3: new full-speed USB device number 4 using ohci-pci
Jan 19 09:57:40 clara kernel: usb 6-3: New USB device found, idVendor=0c4b, idProduct=0100
Jan 19 09:57:40 clara kernel: usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 19 09:57:40 clara kernel: cyberjack 6-3:1.0: Reiner SCT Cyberjack USB card reader converter detected
Jan 19 09:57:40 clara kernel: usb 6-3: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0
Jan 19 09:57:40 clara mtp-probe[3220]: checking bus 6, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3"
Jan 19 09:57:41 clara mtp-probe[3220]: bus: 6, device: 4 was not an MTP device
Jan 19 09:57:43 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:46 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:49 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:55 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:58 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:58:01 clara ModemManager[1193]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3': not supported by any plugin

Da bei mir auch beim Einstecken kurz beide Leds aufleuchten und dann ausgehen, habe ich nach dem Vorschlag (https://forums.opens...-Hibiscus/page3) die 42.1 Module eingebunden. Allerdings ohne Erfolg.

 

Die MOdule:

clara:~ # zypper se -si pcsc chip
Retrieving repository 'Packman Repository' metadata ....................................................................................................................[done]
Building repository 'Packman Repository' cache .........................................................................................................................[done]
Loading repository data...
Reading installed packages...

S | Name         | Type    | Version    | Arch   | Repository        
--+--------------+---------+------------+--------+-------------------
i | libchipcard  | package | 5.0.4-34.2 | x86_64 | security:chipcard 
i | libchipcard6 | package | 5.0.4-34.2 | x86_64 | security:chipcard 
i | libpcsclite1 | package | 1.8.14-1.1 | x86_64 | openSUSE:Leap:42.1
i | pcsc-ccid    | package | 1.4.20-4.2 | x86_64 | openSUSE:Leap:42.1
i | pcsc-lite    | package | 1.8.14-1.1 | x86_64 | openSUSE:Leap:42.1

Ich kann keine cyberjack.rules finden.

 

Wer kann mir  weiterhelfen?

 

Vielen Dank

Franz



#4 Sauerland

Sauerland

    Neues Mitglied

  • Members
  • PIP
  • 6 Beiträge:

Geschrieben 19 January 2017 - 10:36 AM

Auch ich kann nach der Umstellung von 42.1 auf 42.2 nicht mehr auf den Chipkartenleser zugreifen. Allerdings habe ich eine andere Umgebung und andere Meldungen.

clara:~ # systemctl status pcscd.service
● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-01-19 09:37:22 CET; 14s ago
 Main PID: 3066 (pcscd)
    Tasks: 2 (limit: 512)
   CGroup: /system.slice/pcscd.service
           └─3066 /usr/sbin/pcscd --foreground --auto-exit

Jan 19 09:37:22 clara systemd[1]: Started PC/SC Smart Card Daemon.
clara:~ # lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 006 Device 002: ID 0c4b:0100 Reiner SCT Kartensysteme GmbH cyberJack e-com/pinpad

Wenn ich den Chipkartenleser anschließe kommen die Meldungen:

lara:~ # systemctl status pcscd.service
● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/usr/lib/systemd/system/pcscd.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-01-19 09:37:22 CET; 14s ago
 Main PID: 3066 (pcscd)
    Tasks: 2 (limit: 512)
   CGroup: /system.slice/pcscd.service
           └─3066 /usr/sbin/pcscd --foreground --auto-exit

Jan 19 09:53:51 clara nmbd[1857]:   Cannot sync browser lists.
Jan 19 09:57:30 clara kernel: usb 6-3: USB disconnect, device number 2
Jan 19 09:57:30 clara kernel: cyberjack ttyUSB0: Reiner SCT Cyberjack USB card reader converter now disconnected from ttyUSB0
Jan 19 09:57:30 clara kernel: cyberjack 6-3:1.0: device disconnected
Jan 19 09:57:40 clara kernel: usb 6-3: new full-speed USB device number 4 using ohci-pci
Jan 19 09:57:40 clara kernel: usb 6-3: New USB device found, idVendor=0c4b, idProduct=0100
Jan 19 09:57:40 clara kernel: usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 19 09:57:40 clara kernel: cyberjack 6-3:1.0: Reiner SCT Cyberjack USB card reader converter detected
Jan 19 09:57:40 clara kernel: usb 6-3: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0
Jan 19 09:57:40 clara mtp-probe[3220]: checking bus 6, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3"
Jan 19 09:57:41 clara mtp-probe[3220]: bus: 6, device: 4 was not an MTP device
Jan 19 09:57:43 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:46 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:49 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:55 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:57:58 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 09:58:01 clara ModemManager[1193]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3': not supported by any plugin

Da bei mir auch beim Einstecken kurz beide Leds aufleuchten und dann ausgehen, habe ich nach dem Vorschlag (https://forums.opens...-Hibiscus/page3) die 42.1 Module eingebunden. Allerdings ohne Erfolg.

 

Die MOdule:

clara:~ # zypper se -si pcsc chip
Retrieving repository 'Packman Repository' metadata ....................................................................................................................[done]
Building repository 'Packman Repository' cache .........................................................................................................................[done]
Loading repository data...
Reading installed packages...

S | Name         | Type    | Version    | Arch   | Repository        
--+--------------+---------+------------+--------+-------------------
i | libchipcard  | package | 5.0.4-34.2 | x86_64 | security:chipcard 
i | libchipcard6 | package | 5.0.4-34.2 | x86_64 | security:chipcard 
i | libpcsclite1 | package | 1.8.14-1.1 | x86_64 | openSUSE:Leap:42.1
i | pcsc-ccid    | package | 1.4.20-4.2 | x86_64 | openSUSE:Leap:42.1
i | pcsc-lite    | package | 1.8.14-1.1 | x86_64 | openSUSE:Leap:42.1

Ich kann keine cyberjack.rules finden.

 

Wer kann mir  weiterhelfen?

 

Vielen Dank

Franz

Du musst auch den Treiber pcsc-cyberjack installieren, bei mir ist nur installiert:

zypper se -si cyber pcsc chip
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S | Name           | Typ   | Version              | Arch   | Repository               
--+----------------+-------+----------------------+--------+--------------------------
i | libpcsclite1   | Paket | 1.8.17-3.1           | x86_64 | openSUSE-Leap-42.2-Update
i | pcsc-cyberjack | Paket | 3.99.5final.SP09-1.1 | x86_64 | openSUSE-Leap-42.2-Oss   
i | pcsc-lite      | Paket | 1.8.17-3.1           | x86_64 | openSUSE-Leap-42.2-Update

Moneyplex läuft.....



#5 flinter

flinter

    Neues Mitglied

  • Members
  • PIP
  • 2 Beiträge:

Geschrieben 19 January 2017 - 15:06 PM

Vielen Dank, das hatte ich übersehen. Ursprünglich, alles mit 42.2 war er auch installiert. Durch den Wechsel auf die frühere Version, ist er mir entwischt. Leider ohne Erfolg.

clara:~ # zypper se -si pcsc 
Loading repository data...
Reading installed packages...

S | Name           | Type    | Version               | Arch   | Repository        
--+----------------+---------+-----------------------+--------+-------------------
i | libpcsclite1   | package | 1.8.14-1.1            | x86_64 | openSUSE:Leap:42.1
i | pcsc-ccid      | package | 1.4.20-4.2            | x86_64 | openSUSE:Leap:42.1
i | pcsc-cyberjack | package | 3.99.5final.SP09-79.1 | x86_64 | security:chipcard 
i | pcsc-lite      | package | 1.8.14-1.1            | x86_64 | openSUSE:Leap:42.1

Bei mir nutzt keine Linuxanwendung den Leser, er muss über virtuelbox an einen w7-Gast weitergeleitet werden. Theoretisch kann da auch was anderes sein. Ich orientiere mich aber an die Fehlermeldungen beim usb-Anschließen und dass die led, die normalerweise an ist nur kurz aufblinkt und dann aus ist.

Jan 19 14:42:59 clara systemd[1]: Started PC/SC Smart Card Daemon.
Jan 19 14:43:44 clara kernel: usb 6-3: USB disconnect, device number 5
Jan 19 14:43:44 clara kernel: cyberjack ttyUSB0: Reiner SCT Cyberjack USB card reader converter now disconnected from ttyUSB0
Jan 19 14:43:44 clara kernel: cyberjack 6-3:1.0: device disconnected
Jan 19 14:43:44 clara systemd[1]: smartcard.target: Unit not needed anymore. Stopping.
Jan 19 14:43:44 clara systemd[1]: Stopped target Smart Card.
Jan 19 14:43:51 clara kernel: usb 6-3: new full-speed USB device number 6 using ohci-pci
Jan 19 14:43:51 clara kernel: usb 6-3: New USB device found, idVendor=0c4b, idProduct=0100
Jan 19 14:43:51 clara kernel: usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 19 14:43:51 clara kernel: cyberjack 6-3:1.0: Reiner SCT Cyberjack USB card reader converter detected
Jan 19 14:43:51 clara kernel: usb 6-3: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0
Jan 19 14:43:51 clara mtp-probe[6503]: checking bus 6, device 6: "/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3"
Jan 19 14:43:52 clara mtp-probe[6503]: bus: 6, device: 6 was not an MTP device
Jan 19 14:43:52 clara systemd[1]: Reached target Smart Card.
Jan 19 14:43:53 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 14:43:56 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 14:43:59 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 14:44:05 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 14:44:08 clara ModemManager[1193]: <warn>  (ttyUSB0): port attributes not fully set
Jan 19 14:44:08 clara kernel: device eth0 left promiscuous mode
Jan 19 14:44:11 clara ModemManager[1193]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3': not supported by any plugin

Mit dem pcsc-cyberjack sind nun auch die udev-regeln da. Allerdings verstehe ich davon nichts.

clara:~ # cat /usr/lib/udev/rules.d/40-cyberjack.rules     
SUBSYSTEM!="usb", GOTO="cyberjack_rules_end"
ENV{DEVTYPE}!="usb_device", GOTO="cyberjack_rules_end"
ACTION!="add", GOTO="cyberjack_rules_end"

ENV{ID_USB_INTERFACES}=="", IMPORT{program}="usb_id --export %p"

ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0100", ENV{ID_SMARTCARD_READER}="1"
ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0300", ENV{ID_SMARTCARD_READER}="1"
ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0400", ENV{ID_SMARTCARD_READER}="1"
ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0401", ENV{ID_SMARTCARD_READER}="1"
ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0500", ENV{ID_SMARTCARD_READER}="1"
ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0501", ENV{ID_SMARTCARD_READER}="1"

LABEL="cyberjack_rules_end"

Mir gehen die Ideen aus, was ich noch machen kann.



#6 Sauerland

Sauerland

    Neues Mitglied

  • Members
  • PIP
  • 6 Beiträge:

Geschrieben 21 January 2017 - 19:13 PM

Wie hast du umgestellt von 42.1 auf 42.2?

Und warum wieder zurück zu 42.1?







Also tagged with one or more of these keywords: linux, opensuse, e-com, pinpad