[pcsc-lite daemon doesn't work correctly]

-

[pcsc-lite daemon doesn't work correctly]

Ich konnte das Problem inzwischen lösen. Ursache war eine nicht passende Produkt ID (ATTRS{idProduct}) in 92-cyberjack.rules (Details siehe hier).

[pcsc-lite daemon doesn't work correctly]

Hallo,

 

ich habe pcsc-lite-1.8.6 unter Gentoo-Linux installiert

 

Der Dämon wird mit folgendem Init-Skript gestartet:

# cat /etc/init.d/pcscd 
#!/sbin/runscript
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcsc-lite/files/pcscd-init.5,v 1.2 2012/12/28 11:53:28 flameeyes Exp $

name="PC/SC Daemon"

pidfile=/var/run/pcscd/pcscd.pid

command=/usr/sbin/pcscd
command_args="${EXTRA_OPTS}"

start_stop_daemon_args="--user pcscd:pcscd"

depend() {
       need localmount
       after udev openct
       use logger
}

start_pre() {
       checkpath -d -m 0755 -o pcscd:pcscd /var/run/pcscd
}

Wenn ich Debugging in /etc/cyberjack/cyberjack.conf aktiviere und den Dämon starte, bekomme ich folgende Fehlermeldung:

 

/etc/init.d/pcscd start
* Starting PC/SC Daemon ...                                                                                                   [ ok ]

# cat /var/log/messages
...
Apr 25 00:22:20 gentoo2 start-stop-daemon: pam_unix(start-stop-daemon:session): session opened for user pcscd by thomas(uid=0)
Apr 25 00:22:20 gentoo2 pcscd: readerfactory.c:1009:RFInitializeReader() Open Port 0x200000 Failed (usb:0c4b/0400:libudev:0:/dev/bus/usb/001/007)
Apr 25 00:22:20 gentoo2 pcscd: readerfactory.c:312:RFAddReader() REINER SCT cyberJack ecom_a (3680486100) init failed.
Apr 25 00:22:20 gentoo2 pcscd: hotplug_libudev.c:384:HPAddDevice() Failed adding USB device: REINER SCT cyberJack ecom_a

# cat /tmp/cj.log 
IFD   :[00006e83]:2013/04/23 22:12:07:936902:[DRIVER]:ifd.cpp:  267: Driver initialized
IFD   :[00006e83]:2013/04/23 22:12:07:936957:[LUN0]:ifd.cpp: 1491: IFDHCreateChannelByName(0, usb:0c4b/0400:libudev:0:/dev/bus/usb/001/004)
COMERR:[00006e83]:2013/04/23 22:12:07:937855:[<USB>]:Using USB implementation 3
COMIN :[00006e83]:2013/04/23 22:12:07:937875:[<USB>]:ausb31.c:  325: Extending AUSB handle as type 3
COMIN :[00006e83]:2013/04/23 22:12:07:938243:[<USB>]:ausb31.c:  345: libusb_open() failed: rv
COMIN :[00006e83]:2013/04/23 22:12:07:938259:[<USB>]:ausb.c:  165: Could not extend as type 3 (-1)
COMERR:[00006e83]:2013/04/23 22:12:07:938278:[<USB>]:Unable to open device
IFD   :[00006e83]:2013/04/23 22:12:07:938290:[LUN0]:ifd.cpp:  591: Unable to connect reader "usb:0c4b/0400:libudev:0:/dev/bus/usb/001/004" (-1)

Wenn ich danach den Dämon stoppe und den Treiber direkt starte, sieht es besser aus:

# /usr/sbin/pcscd -f
CYBERJACK: Started

# cat /tmp/cj.log 
IFD   :[00006ec0]:2013/04/23 22:25:27:471007:[DRIVER]:ifd.cpp:  267: Driver initialized
IFD   :[00006ec0]:2013/04/23 22:25:27:471057:[LUN0]:ifd.cpp: 1491: IFDHCreateChannelByName(0, usb:0c4b/0400:libudev:0:/dev/bus/usb/001/004)
COMERR:[00006ec0]:2013/04/23 22:25:27:473338:[<USB>]:Using USB implementation 3
COMIN :[00006ec0]:2013/04/23 22:25:27:473368:[<USB>]:ausb31.c:  325: Extending AUSB handle as type 3
COMIN :[00006ec0]:2013/04/23 22:25:27:473766:[<USB>]:ausb.c:  112: ausb_set_configuration
COMERR:[00006ec0]:2013/04/23 22:25:27:473966:[<USB>]:Claim interface
COMIN :[00006ec0]:2013/04/23 22:25:27:474009:[<USB>]:ausb.c:   92: ausb_claim_interface
COMIN :[00006ec0]:2013/04/23 22:25:27:474034:[<USB>]:ausb.c:   81: registering callback:0x7fbc0c73af60
COMIN :[00006ec0]:2013/04/23 22:25:27:474047:[<USB>]:ausb.c:  186: ausb_start_interrupt
COMIN :[00006ec0]:2013/04/23 22:25:27:474058:[<USB>]:ausb31.c:   80: Halting interrupt pipe.
COMERR:[00006ec0]:2013/04/23 22:25:27:475181:[001:004]:USBUnix.cpp:  222: Product: cyberJack Secoder
COMINF:[00006ec0]:2013/04/23 22:25:27:475202:[001:004]:Reader Productstring: [cyberJack Secoder]
COMINF:[00006ec0]:2013/04/23 22:25:27:475220:[001:004]:Recognized device 0400 [cyberJack Secoder]
...
IFD   :[00006ec0]:2013/04/23 22:25:27:480413:[LUN0]:ifd.cpp:  604: Device "usb:0c4b/0400:libudev:0:/dev/bus/usb/001/004" connected
... 

Woran könnte es liegen, dass der pcscd Dämon den Kartenleser nicht verbinden kann?

 

Gruß