Jump to content
Melde dich an, um diesem Inhalt zu folgen  
ihmehl

Opensuse 13.2

Empfohlene Beiträge

Hallo,

 

mit der neuen Version von Opensuse lässt sich der RFID comfort nicht ansprechen. Moneyplex zeigt keinen Treiber an, Cyberjack meldet: "Service is not available". Weitere Ausgaben:

# killall pcscd
pcscd: Kein Prozess gefunden

# /usr/sbin/pcscd -f -a -d
00000000 debuglog.c:295:DebugLogSetLevel() debug level=debug
00000050 utils.c:87:GetDaemonPid() Can't open /var/run/pcscd/pcscd.pid: No such file or directory
00000050 configfile.l:286:DBGetReaderListDir() Parsing conf directory: /etc/reader.conf.d
00000035 configfile.l:298:DBGetReaderListDir() Skipping non regular file: .
00000004 configfile.l:298:DBGetReaderListDir() Skipping non regular file: ..
00000004 configfile.l:339:DBGetReaderList() Parsing conf file: /etc/reader.conf.d/reader.conf
00000044 pcscdaemon.c:571:main() pcsc-lite 1.8.11 daemon ready.
00000797 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000078 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000080 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x04A9, PID: 0x221C, path: /dev/bus/usb/003/002
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1A40, PID: 0x0101, path: /dev/bus/usb/003/003
00000094 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/004/001
00000091 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000066 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000075 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000074 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000098 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000070 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000076 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x03F0, PID: 0x1017, path: /dev/bus/usb/002/003
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000077 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000074 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000070 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000099 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x13FE, PID: 0x4100, path: /dev/bus/usb/002/006
00000073 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000078 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/007
00000020 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/007
00000005 hotplug_libudev.c:347:HPAddDevice() Adding USB device: REINER SCT cyberJack RFID komfort                                                                                                                                            
00000033 readerfactory.c:1015:RFInitializeReader() Attempting startup of REINER SCT cyberJack RFID komfort (3284189382) 00 00 using /usr/lib64/readers/libifd-cyberjack.bundle/Contents/Linux/libifd-cyberjack.so                            
CYBERJACK: Started                                                                                                                                                                                                                           
00001708 readerfactory.c:900:RFBindFunctions() Loading IFD Handler 3.0                                                                                                                                                                       
00014170 readerfactory.c:353:RFAddReader() Using the pcscd polling thread                                                                                                                                                                    
00000399 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005                                                                                                                    
00000100 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002                                                                                                                    
00000045 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010097 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010120 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010095 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010090 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010100 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00010093 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00                                                                                                            
00008141 eventhandler.c:292:EHStatusHandlerThread() powerState: POWER_STATE_POWERED                                                                                                                                                          
00000030 Card ATR: 3B FF 18 00 FF 81 31 FE 45 65 63 11 08 66 01 56 00 11 62 20 03 12 06 20 59                                                                                                                                                
00401053 eventhandler.c:481:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED   

Hat jemand eine guten Ratschlag bereit?

 

Viele Grüße

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hallo,

 

mit der neuen Version von Opensuse lässt sich der RFID comfort nicht ansprechen. Moneyplex zeigt keinen Treiber an, Cyberjack meldet: "Service is not available". Weitere Ausgaben:


Hat jemand eine guten Ratschlag bereit?

 

Viele Grüße

Ich wiederhole die letzte Ausgabe, weil der Fehlerhinweis fehlte

/usr/sbin/pcscd -f -a -d
00000000 debuglog.c:295:DebugLogSetLevel() debug level=debug
00000126 configfile.l:286:DBGetReaderListDir() Parsing conf directory: /etc/reader.conf.d
00000034 configfile.l:298:DBGetReaderListDir() Skipping non regular file: .
00000011 configfile.l:298:DBGetReaderListDir() Skipping non regular file: ..
00000010 configfile.l:339:DBGetReaderList() Parsing conf file: /etc/reader.conf.d/reader.conf
00000071 pcscdaemon.c:571:main() pcsc-lite 1.8.11 daemon ready.
00000760 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000094 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000090 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x04A9, PID: 0x221C, path: /dev/bus/usb/003/002
00000095 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000084 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1A40, PID: 0x0101, path: /dev/bus/usb/003/003
00000107 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/004/001
00000104 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000079 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000088 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000083 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000085 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000108 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000082 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000095 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000089 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x03F0, PID: 0x1017, path: /dev/bus/usb/002/003
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000089 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000088 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000083 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000093 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/006
00000028 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/006
00000010 hotplug_libudev.c:347:HPAddDevice() Adding USB device: REINER SCT cyberJack RFID komfort
00000040 readerfactory.c:1015:RFInitializeReader() Attempting startup of REINER SCT cyberJack RFID komfort (3284189382) 00 00 using /usr/lib64/readers/libifd-cyberjack.bundle/Contents/Linux/libifd-cyberjack.so
CYBERJACK: Started
00001699 readerfactory.c:900:RFBindFunctions() Loading IFD Handler 3.0
00014083 readerfactory.c:353:RFAddReader() Using the pcscd polling thread
00000441 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000091 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000042 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010100 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010110 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010130 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00003898 eventhandler.c:292:EHStatusHandlerThread() powerState: POWER_STATE_POWERED
00000028 Card ATR: 3B FF 18 00 FF 81 31 FE 45 65 63 11 08 66 01 56 00 11 62 20 03 12 06 20 59
00400906 eventhandler.c:481:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED
45790873 winscard_msg_srv.c:256:ProcessEventsServer() Common channel packet arrival
00000033 winscard_msg_srv.c:268:ProcessEventsServer() ProcessCommonChannelRequest detects: 14
00000005 pcscdaemon.c:137:SVCServiceRunLoop() A new context thread creation is requested: 14
00008551 auth.c:136:IsClientAuthorized() Process 29569 (user: 1000) is NOT authorized for action: access_pcsc
00000138 winscard_svc.c:329:ContextThread() Rejected unauthorized PC/SC client

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

 

Ich wiederhole die letzte Ausgabe, weil der Fehlerhinweis fehlte

/usr/sbin/pcscd -f -a -d
00000000 debuglog.c:295:DebugLogSetLevel() debug level=debug
00000126 configfile.l:286:DBGetReaderListDir() Parsing conf directory: /etc/reader.conf.d
00000034 configfile.l:298:DBGetReaderListDir() Skipping non regular file: .
00000011 configfile.l:298:DBGetReaderListDir() Skipping non regular file: ..
00000010 configfile.l:339:DBGetReaderList() Parsing conf file: /etc/reader.conf.d/reader.conf
00000071 pcscdaemon.c:571:main() pcsc-lite 1.8.11 daemon ready.
00000760 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000094 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000090 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x04A9, PID: 0x221C, path: /dev/bus/usb/003/002
00000095 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/003/001
00000084 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1A40, PID: 0x0101, path: /dev/bus/usb/003/003
00000107 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/004/001
00000104 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000079 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000088 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000083 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x24AE, PID: 0x2001, path: /dev/bus/usb/001/003
00000085 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/001/002
00000108 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000082 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000095 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000089 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x03F0, PID: 0x1017, path: /dev/bus/usb/002/003
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000089 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000088 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000086 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x046D, PID: 0x0A0C, path: /dev/bus/usb/002/004
00000083 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000087 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000093 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/006
00000028 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/006
00000010 hotplug_libudev.c:347:HPAddDevice() Adding USB device: REINER SCT cyberJack RFID komfort
00000040 readerfactory.c:1015:RFInitializeReader() Attempting startup of REINER SCT cyberJack RFID komfort (3284189382) 00 00 using /usr/lib64/readers/libifd-cyberjack.bundle/Contents/Linux/libifd-cyberjack.so
CYBERJACK: Started
00001699 readerfactory.c:900:RFBindFunctions() Loading IFD Handler 3.0
00014083 readerfactory.c:353:RFAddReader() Using the pcscd polling thread
00000441 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x05E3, PID: 0x0608, path: /dev/bus/usb/002/005
00000091 hotplug_libudev.c:295:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0024, path: /dev/bus/usb/002/002
00000042 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010100 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010110 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00010130 readerfactory.c:1356:RFWaitForReaderInit() Waiting init for reader: REINER SCT cyberJack RFID komfort (3284189382) 00 00
00003898 eventhandler.c:292:EHStatusHandlerThread() powerState: POWER_STATE_POWERED
00000028 Card ATR: 3B FF 18 00 FF 81 31 FE 45 65 63 11 08 66 01 56 00 11 62 20 03 12 06 20 59
00400906 eventhandler.c:481:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED
45790873 winscard_msg_srv.c:256:ProcessEventsServer() Common channel packet arrival
00000033 winscard_msg_srv.c:268:ProcessEventsServer() ProcessCommonChannelRequest detects: 14
00000005 pcscdaemon.c:137:SVCServiceRunLoop() A new context thread creation is requested: 14
00008551 auth.c:136:IsClientAuthorized() Process 29569 (user: 1000) is NOT authorized for action: access_pcsc
00000138 winscard_svc.c:329:ContextThread() Rejected unauthorized PC/SC client

Habe den cyberjack RFID standard und habe aber auch das Problem, dass mit opensuse 13.2 der Kartenleser in moneyplex nicht gefunden wird. Es sieht aber so aus, als ob er korrekt installiert ist

 

04457143 eventhandler.c:407:EHStatusHandlerThread() powerState: POWER_STATE_POWERED

00000023 eventhandler.c:422:EHStatusHandlerThread() Card inserted into REINER SCT cyberJack RFID standard (6551703112) 00 00

00000018 Card ATR: 3B FF 18 00 FF 81 31 FE 45 65 63 11 03 50 02 80 00 08 35 30 05 23 05 01 FA

00400750 eventhandler.c:481:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED

01201803 eventhandler.c:361:EHStatusHandlerThread() Card Removed From REINER SCT cyberJack RFID standard (6551703112) 00 00

 

moneyplex zeigt aber keinen Kartenleser. Hab schon an den support von moneyplex und ReinerSCT geschrieben.

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Ich hatte das gleiche Problem, anscheinend fehlen in den Packeten einige config-dateien

ich habe die Packete

libpcsclite1
libpcsclite1-32bit
pcsc-cyberjack
pcsc-lite

von suse 13.1 installiert und es geht wieder

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hallo zusammen,

 

es ist wohl eher ein Rechte-Problem. Ich habe das gleiche Problem. Ich habe den Treiber für 64Bit OpenSuSE 13.1 von der Homepage installiert. Zusätzlich habe ich das Paket:

 

pcsc-lite

 

nachinstalliert jedoch aus dem 13.2-Repo. Danach kann ich den CyberJack aus Moneyplex ansprechen. Allerdings nur wenn ich Moneyplex als root starte.

 

Was muss ich tun damit es auch als User klappt?

 

Viele Grüße

pixel

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hallo zusammen,

 

ich habe jetzt keine Änderung vor genommen bzw. keine Pakete aus  13.1 installiert. Als ich heute Morgen das Laptop (mit 13.2) hoch gefahren habe wurden mir vom SuSE Update-Pakete zu (pcsc...) angeboten. Danach hat es funktioniert.

 

Viele Grüße

pixel

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

Melde dich an, um diesem Inhalt zu folgen  

×
×
  • Neu erstellen...